ENGLISH
UNO G8 Series
| User manual
12
13
User manual
|
UNO G8 Series
Series
5
|
TECHNICAL SPECIFICATIONS
RECEIVER - UNO G8R
Type
True Diversity
Modulation
FM
Frequencies range
1785 - 1800MHz
Channels
192 (12 x 16 groups)
Antennas
x2 - BNC
Frequency response
50Hz – 16.000Hz (±3dB)
Signal-to-noise ratio
>95dB
Squelch
Low, Mid, High
Transmission optimisation
Pilot tone
T.H.D.
<0,8%
Audio outputs
Balanced XLR, unbalanced 6,35mm (1/4”) jack
Balanced output level
+ 6dBu
Controls
Power, Value up, Value down, ASC, SET
Indicators
Multi-function LCD
Dimensions (W x H x D)
212 x 44 x 166 mm (8.34” x 1,73” x 6.54”)
Weight
910 g (32 oz)
PROBLEM
LEDS
SOLUTION
No sound or very
low sound level.
Transmitter
LCD not lit.
Make sure the transmitter is on
and batteries charged.
Receiver LCD turned off.
Check the power supply
Turn on the unit
Receiver RF LED turned off.
Transmitter LED turned on.
Make sure the transmitter and receiver
share the same frequency.
Reduce the distance between transmitter
and receiver,
Check that the transmission space
(“visual contact”) between transmitter
and receiver is free.
Make sure the receiver antennas are
properly connected, V shaped and pointing
upward.
Receiver RF indicator is on.
The beltpack display is on,
the MUTE LED is lit.
Deactivate MUTE function.
Receiver RF indicator is on.
Raise receiver gain.
Raise the transmitter gain.
Check audio connection between receiver
and mixer.
Check mixer configuration.
Distortion or unwanted
interferences.
Receiver RF LED
turned on.
Remove possible sources of interference
such as CD players, computers, digital
broadcast sources, etc.
Distorted sound.
Transmitter
batteries status
LED flashes.
Receiver LCD
shows a too high
AF level.
Replace batteries.
Lower transmitter gain.
4
|
TROUBLESHOOTING