Ansul INERGEN 150-BAR, Руководство пользователя

Страница: 79 / 92

System Components
UL EX-4510 2-1-12 Page 1-20
REV. 3
Description
The Pressure Test Assembly, Part No. 416753 for CV-90
valves and Part No. 423923 for CV-98 valves, is required to
properly perform the semi-annual pressure check per
NFPA 2001. The pressure test assembly consists of a cali-
brated gauge, adaptor, and handwheel. The assembly is
attached to the fill port of the INERGEN
®
valve. As the
handwheel is turned in, the fill port is opened and the pres-
sure is read on the gauge. After verifying the pressure in
the cylinder, the handwheel is turned out, closing the fill
port, and the assembly can be removed.
Two pressure tester convertors are also available. These
convertors allow a CV-90 pressure test assembly to be
used on a CV-98 valve and also a CV-98 pressure test
assembly to be used on a CV-90 valve.
Pressure Test Assembly
Shipping
Assembly
Part No.
Description
416753 Pressure Test Assembly – CV-90
423923 Pressure Test Assembly – CV-98
423657 Adaptor Convertor (converts CV-90
pressure tester to CV-98 valve)
426181 Adaptor Convertor (converts CV-98
pressure tester to CV-90 valve)
Component Material Approvals
Handwheel Cast Zinc Alloy UL Listed (EX-4510);
Body Brass Listed for use with
Adaptor Brass FM Approved
Gauge Stainless systems
Steel Case
Laminated
Safety
Glass Lens
416753
002256
423923
003686
ANSUL
®
Copyright © 2012 Tyco Fire Products LP.
All rights reserved.
Form No. F-93240-03
One Stanton Street +1-715-735-7411
Marinette, WI 54143-2542 www.ansul.com