6-22
Viewing and Programming Analog and Digital Pseudos,
Continued
Card 21 - Analog User
Pseudos,
Follow the steps below to program an analog user pseudo’s point type or custom label.
1.
Edit the point type of a user analog pseudo point, as follows:
a.
Move to the line corresponding to the pseudo point whose point type you want to
change.
b.
Double click on the point’s existing point type. A list box appears, containing the
choices shown in the following table. Click on the appropriate choice.
2.
Double click in the Custom Label field to edit the point’s custom label.
Card 22 - System Defined
List Pseudos
List Pseudos provide a means of monitoring a range of similar devices. (All Waterflow Alarm
Monitor Zones, for example.)
Double clicking on the Card 22 icon within the Active Cards List displays the System List
Pseudo points and their pre-assigned label. This is a view-only screen and cannot be edited.
Continued on next page
Figure 6-16. System List Pseudo Points
Table 6-7. Analog Pseudo Point Types
Point Type
Application
ANALOG
Stores a static, analog value between 0 and 65,535.
COUNTER
Allows the point’s analog value to be incremented by Custom
Control equations. Typically used to track the number of a system
condition and trigger an action when a threshold is reached.
TIMER
Allows you to set an analog value between 0 and 65,535 that can
be used as a countdown timer. A timer can be used to delay some
action until a specified amount of time passes.
