QUICK START
WIRELESS
5. Quick Start Guide
1.
Insert fully charged batteries into the transmitter. Your Ansr Audio transmitter will
operate on either rechargeable or alkaline batteries.
2.
Make audio output and power connections as described in Section 7.
3.
If connecting to a mixer MIC input, set the AW-25 volume to the one o'clock position. If
connecting to a mixer LINE input, set the AW-25 volume to MAX position. Be sure to
keep the mixer output turned down until ready to test.
4.
Turn on AW-25 receiver by pressing the POWER button for 4 seconds
5.
Select operating channel:
Auto scan selection: Press SET/SCAN for 3 seconds to search for the next
interference-free channel. Channel display will stop flashing when channel is locked in.
Manual selection: Press SET/SCAN for 1 second, channel display will flash. Press the
up/down arrows to select channel. Press SET/SCAN quickly to lock channel in.
6.
Turn on your AW-1 handheld or AW-6 bodypack transmitter and select the matching
channel. See Section 6 for details.
7.
After selecting the transmitter and receiver to the same frequency, the RF meter on the
AW-25 front panel will display signal strength. For this, more is better.
8.
Slowly raise your mixer volume to test.
9.
If setting up additional systems, leave the first transmitter on when using Auto Scan
selection – this way, the second receive r will 'see' the first transmitter and avoid that
channel. Follow similarly if setting up additional systems.
Содержание Scan16
Страница 1: ......
