ANSMANN vario pro, Инструкция по эксплуатации, Страница: 5 / 5

trial and error. This is no problem for the charger or the battery as the circuits are protected.
After finalising the adjustment of the contacts in the charger, the sliding cover will clamp
the battery and hold it in place. The charging process of Digicharger Vario
pro
starts and
finishes automatically. After connecting a battery to the charger, all the bars in the display
will flash. During this time the charger is making a battery detection test. All information
regarding charging will be shown on the LCD display.
charging aa/aaa Batteries
Insert the AA or AAA batteries for charging into the dedicated charging slots. please pay
attention to ensure that you insert them with the correct polarity. Insert the batteries
according to the symbols in the charging slots. Adjust the contact pins into the correct
position with the two blue guiding pins (3). The charging process of the Digicharger Vario
pro
starts and finishes automatically. After connecting a battery to the charger, all the bars in
the display will flash. During this time the charger is making a battery detection test. All
information regarding charging will be shown on the LCD display.
charging Via usB pOrt
For charging a USb device please connect the Digicharger Vario
pro
to the mains. Then
connect your USb product via a suitable cable (not supplied) to the Digicharger Vario
pro
.
Battery defect detectiOn
If the battery to be charged is defective, the charger will detect it and will not allow
charging.
safety tiMer
The integrated safety timer terminates the charging procedure after 4 hours if the
automatic “battery full” circuit does not see the correct signal from the battery. For an
optimum performance we recommend the use of ANSMANN batteries and battery packs.
charging current:
1000mA
enVirOnMent
rechargeable batteries are not to be disposed of in domestic waste bins. return used
batteries to your dealer or to a battery recycling collection depot.
included in the deliVery
> Digicharger Vario
pro
> Traveller power supply (100-240 V) >12V DC car lighter plug
3 years warranty