ANSMANN FM6.0, Оригинальная инструкция по эксплуатации, Страница: 22 / 51

ORIGINAL OPERATING INSTRUCTIONS - ELECTRIC DRIVE FOR PEDELECS
www.ansmann.de
43 42
GB
ENGLISH
13. START-UP
As soon as the battery is charged and firmly latched in the holder, the drive
system is ready for use.
13.1 SWITCHING ON / OFF
When using a down tube battery you switch ON the electric drive by short
pressing the button on the capacity indicator of the battery (
few se-
conds after you pressed the button display show drive is ON ).
press
100% 20% 40% 60% 80%
If the bicycle is not used, the electric drive and display switch OFF
automatically after 15 minutes (
only when the output current of the
battery is less than 100mA).
When using a carrier battery you switch ON the electric drive by using the
ON / OFF switch at the battery. For switching OFF the electric drive you
have to use the same switch.
ON / OFF
13.2 OPERATION LED DISPLAY
If the electric drive was delivered together with a LED display the drive fun-
ctions would be adjusted by this display.
At the display you have LED signals for the battery level and the motor
assist levels. All functions will be selected by 3 buttons on the display.
pushing aid
assist level selection
LED blinking = assist level 1
LED ON
= assist level 2
LED blinking = assist level 3
LED ON
= assist level 4
LED blinking = assist level 5
LED ON
= assist level 6
battery level
When the electric drive was switched on at the battery the motor assist
level 2 is automatically preselected. With the buttons “
– “ und “ + “ the
motor assist levels could be changed to level 0 (no motor assist) and from
level 1 to level 6. Depends on the selected motor assist level you will get
different motor speed (cruise control function). When you press the button
“
A “ the motor will give a speed of max. 6km/h without pedaling (pushing
aid function) as long as you press this button.
13.3 OPERATION LCD DISPLAY
If the electric drive was delivered together with a LCD display the drive fun-
ctions would be adjusted by this display. The LCD display is equipped with
additional speedometer functions.
The selection of assist levels and the speedometer functions will be done by
the 3 buttons.