EN
13
SAFETY INSTRUCTIONS
Read the User Instructions carefully before use.
Save them for future reference.
• The product is classified as laser class 2 and can cause permanent eye damage. Do not look into
the laser beam. Do not point the laser beam at people or animals, directly or indirectly.
• Only use the supplied mains adapter
• The bulbs are not replaceable.
• Handle the product with care.
• The product is only intended for indoor use. Do not expose the product to moisture, liquids,
shaking or knocks.
• The operating temperature is from 15–30°C. Do not use the product for more than 2 hours
continuously without switching it off and allowing the laser diodes to cool.
• Avoid switching the product on and off too often, and do not use it continuously for long periods.
• Keep the product clean for best performance and lifespan.
• Do not use optical instruments to look at the laser beam. The risk of eye injuries increases if you
look at the laser beam through an optical instrument, such as a telescope or other instrument.
• Transport the product in the original pack.
• This product must only be used for its intended purpose as specified in these instructions.
• The user is responsible for any loss, damage or costs resulting from handling the product or
using it in any other way than described in these instructions.
• No parts of the product can be replaced,or repaired. The whole product must be discarded if any
part is damaged.
WARNING: Laser product class 2
TECHNICAL DATA
Input voltage
110–240 VACC, 50–60 Hz.
Output voltage/current
5.0 V, 1.0 A.
Wavelength
green 532 nm
red 650 nm
Dimensions
130 x 92 x 52 mm.
Laser power
<1mW
Ambient temperature
15–30°C
Weight
320 g
Laser class
II
ENGLISH
