EN
10
SAFETY INSTRUCTIONS
Read the User Instructions carefully before use.
Save these instructions for future reference.
• For indoor and outdoor use.
• It is very important that this party string lights set is NEVER CONNECTED
DIRECTLY to the mains.
• Do not cover the LED bulbs with decorations or other flammable materials.
Make sure there is an adequate flow of air around each of the LED bulbs..
• The LED bulbs cannot be replaced.
• Make sure not to damage the wire insulation on the LED bulb holders.
• Do not staple or nail the wiring on the party string lights set to attach it.
• Do not clench the wiring in doors or windows, this can damage the insulation
on the wiring.
• Do not put the wiring under carpets or other places where it can get damaged.
• Make sure that all the wiring is fully uncoiled and placed so that it cannot be
damaged, and where there is no risk of anyone tripping over it.
• The party string lights set must not be connected to any another product.
• Do not connect the party string lights set to the mains when it is still in the pack.
• Do not allow any of the plastic parts to come into contact with sources of heat
or nakes flames.
• Do not unscrew or twist any of the LED bulbs.
• The party string lights set must not be submeged in water
(e.g. puddles, gutters or ponds).
• The transformer gets hot when it use and so it should be placed on a level,
stable and heat-resistant surface.
• The party string lights set is supplied with a DC 5 V 01 transformer and must
only be used with this.
• Unplug the party string lights set from the mains when leaving the house,
overnight, and when it is left unattended.
• Do not overload the wall sockets. Use different wall sockets around the house
to distribute the load if several party string lights sets are used.
• Only intended for decorative purposes. Must not be used as a toy for children.
User Instructions for
LED String Lights
ENGLISH
