Anslut 018971, Руководство по эксплуатации

Страница: 10 / 19

EN
10
discarded if the glass front is
cracked or damaged.
• The light source is not
replaceable. If it gets broken,
replace the complete unit.
• The minimum distance
between the light and an
illuminated object is one
metre.
WARNING!
The light gets very hot when
it is switched on - risk of burn
injury.
SYMBOLS
The product must be
discarded if the glass front is
cracked or damaged.
Approved as per applicable
directives.
Recycle discarded product as
electrical waste.
TECHNICAL DATA
Rated voltage 230 V ~ 50 Hz
Output 20 W
Protection rating
IP65
Luminous flux 2000 lm
Colour temperature 4000 K
Cord length 2.5 m
SAFETY INSTRUCTIONS
• The light must be connected
to an earthed power point.
• A damaged cord or plug
must be replaced by an
authorised service centre or
qualified personnel to ensure
safe use.
• Regularly check all electrical
connections and power cords
for damage. Rectify any
faults before using the light.
Always have the wiring and
connections checked by an
authorised electrician.
• Check that the mains voltage
corresponds to the rated
voltage on the type plate.
• Do not use the light in
explosive environments, such
as in the vicinity of
flammable liquids, gases or
dust. Do not use the light in
the vicinity of flammable
materials.
• Do not look directly into the
light source.
• Do not use the light if the
glass front is cracked or
damaged. The light must be