Anslut 014780, Руководство по эксплуатации

Страница: 24 / 26

EN
24
ASSEMBLY
1. Put the bottom upright in the foot and
screw in place with screw and washer.
FIG. 2
2. Screw the motor unit on the top upright.
3. Join the top and bottom uprights to each
other.
4. Unscrew the plastic nut anticlockwise from
the motor unit.
5. Fit the back grille on the motor unit and
lock in place with the plastic nut. Tighten
the plastic nut clockwise to lock the back
grille.
FIG. 3
6. Put the fan blade on the motor spindle.
Align the taps to the slot in the fan blade.
Tighten the hub nut anticlockwise to lock
the fan blade.
FIG. 4
7. Fit the grille with the logotype right side
up with the clip.
FIG. 5
8. Lock the front grille firmly to the back
grille. Press the grille with both hands
so that it clicks in place and fix with the
screw.
FIG. 6
HOW TO USE
CONTROL PANEL
Power switch/standby mode.
Press the oscillation button
repeatedly to set the angle. The
adjustment order is 60° → 90° →
120° → no oscillation. The display
shows 60°, 90° and 120°. The
display does not indicate that the
oscillation is switched off.
Tap the button to set the fan speed.
Press the button to switch between
fan modes normal -> low -> sleep
mode-> normal.
1 – 9
The set fan speed is shown on the
display as 1–9.
Tap the button to activate/deactivate
high fan speed mode. Press and hold
the button to activate/deactivate fan
speed mode to temperature.
In high fan speed mode H is show on
the display.
This icon is shown in sleep mode
and the fan speed is changed
automatically according to the
programming. There are three
modes (1, 2, 3). Set the required fan
speed for sleep mode by pressing the
button for fan speed.
This icon is shown when the mode
to adjust fan speed to temperature
is activated.
This icon is shown on the display
when timer control is activated.
FIG. 7