Anslut 014491, Руководство по эксплуатации

Страница: 18 / 20

EN
18
• Do not use the product near
a bath, shower or swimming
pool.
• Do not expose the product to
direct sunlight.
• Do not use product together
with an external speed
controller.
• Do not use the product near
flammable liquids or gas.
• Switch off the product and
pull out the plug before
cleaning.
• Never leave the product
unattended when switched
on.
• Repairs must only be carried
out by an authorised service
centre.
• If the product stops working
properly, switch it off with
the switch on the control
panel and contact the
retailer.
SYMBOLS
Read the instructions.
Safety class II.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage 230 V ~ 50 Hz
Input power 25 W
Safety class II
DESCRIPTION
1. Front grille
2. Rear grille
3. Motor housing
4. Keypad to control speed
5. Foot
6. Lock nut
7. Fan blade
FIG. 1
ASSEMBLY
1. Fasten the foot on the fan unit.
2. Unscrew the plastic nut from the front
of the motor housing by turning it
anticlockwise.
3. Place the rear grille against the front of
the motor housing. The guide pins on the
motor housing should mate in the holes
in the rear grille (8).