Anslut 014212, Руководство по эксплуатации, Страница: 10 / 11

EN
10
SAFETY INSTRUCTIONS
• Check that the power switch
is switched off before
plugging in the plug.
• If the power cord or plug are
damaged they must be
replaced by an authorised
service centre to ensure safe
use.
• Regularly check all electrical
connections and power cords
for damage. Rectify any
faults before using the light.
Always have the wiring and
connections checked by an
authorised electrician.
• Check that the mains voltage
corresponds to the rated
voltage on the type plate.
• Do not use the product near
flammable materials or
sources of heat.
• Do not use the product if the
glass front is cracked or
damaged. The product must
be discarded if the glass front
is cracked or damaged.
• The light source is not
replaceable. The entire
product must be replaced if it
stops working.
WARNING!
• The light gets very hot
when it is switched on - risk
of burn injury.
• Never modify the power
cord, plug or the product in
any way – risk of electric
shock. Repairs should be
carried out by an
electrician.
SYMBOLS
Read the instructions.
The product must be
discarded if the glass front
is cracked or damaged.
Approved as per applicable
directives.
Recycle discarded product
as electrical waste.