EN
7
ASSEMBLY
CONNECTION OF SWITCH
1. Prepare the wires as shown.
FIG. 1
2. Connect the wires.
FIG. 2
3. Put on the casing and tighten the screw.
4. Tighten the cable relief to specified
torque.
FIG. 3
SAFETY INSTRUCTIONS
• Do not connect power strips to each other.
• Do not cover the power strip.
ELECTRICAL SAFETY
New installations and extensions to existing
systems should always be carried out by
an authorised electrician. If you have the
necessary experience and knowledge
(otherwise contact an electrician), you can
replace power switches and wall sockets,
fit plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of fire.
WARNING!
The product is only intended for permanent
installation.
SYMBOLS
Read the instructions.
Approved in accordance with the
relevant directives.
Recycle discarded product as electrical
waste.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Current
6 A
Содержание 007249
Страница 3: ...1 2 3 L L N N 5 15 20...
