EN
18
Timer function
Enable/disable the timer function by pressing
TIMER on the remote control or the control
panel. Press to change the set time from 0.5
to 8 hours in steps of 0.5. The corresponding
status light on the top of the fan goes on.
Normal mode/sleep mode
1. Press MODE once to enable natural mode
(NT). In this mode the fan speed increases
or reduces automatically.
2. Press MODE again to enable sleep
mode (SL). In this mode the fan speed is
reduced. Press MODE again to return to
normal mode (NM). The corresponding
status light on the top of the fan goes on.
Adjust display brightness
Press MODE for three seconds to adjust the
brightness of the display.
MAINTENANCE
NOTE:
Pull out the plug before installation and/or
cleaning.
• Clean the fan with a soft cloth moistened
with a mild detergent. Make sure that no
water or other liquid gets into the fan.
• Do not use petrol, solvents or detergents
that can damage the plastic parts.
Replacing the battery
1. Press in the catch and open the battery
flap.
2. Insert the battery with positive terminal up.
Only use batteries of the recommended
type.
3. Push in the battery flap on the remote
control.
Содержание 004916
Страница 3: ...1 2 1 2 3 6 7 5 4...
