USER MANUAL
MAIN FUNCTION AND FEATURES
：
1.
DC 9V power supply, standby current less than 20mA
2.
Six groups of alarm telephone numbers can be pre-stored
3.
Ten seconds pre-recorded memo messages
4.
Long distance via public telephone network set guard status or withdraw guard to the main
dialer
5.
Long distance via public telephone network monitor the background sound around the
auto-dialer
6.
Setting guard delay time 0~90 seconds for four guard zone
7.
Setting alarm delay time 0~90 seconds for four guard zone alarm signal
8.
Siren hooting time length control option 1~20 minutes
9.
Telephone line cut off alarm function option
10.
Six wireless distinguishable guard zones LED indicator on the main set
11.
Each of the four guard zones can be set on guard or withdraw guard independently
12.
One panic key for help provided on the main set
13.
Two panic keys for help is provided on the remote controller which will make the main dialer
give out loud sound or not as well as dialing when being trigged
14.
Convenient key input is prepared on the front panel
Various kinds of door magnetic switch and PIR infrared detector are configurable.
Rechargeable DC9V power transformer provided for power cut backup.The dialer can report
the alarm messages to an administration computer immediately via the public telephone
network..
OPERATION METHOD
Fig.1 System connection illustration
Note:the extension can connected to your telephone machine
Set guard and withdraw guard
This alarm system can be divided into four alarm guard zones. Each guard zone can
configured with several door entry detectors, infrared detectors, gas leakage detectors and
smoke detectors. You can set guard or withdraw guard using the remote controller or by
pressing the keypay on the main set.
1.
Setting guard by using remote controller
*Setting guard:
Press and release
key on the remote controller, the ‘ GUARD” LED on the main set
will light up ,buzzer beep one time ,the main set went into status of setting guard. At this time,
