Anritsu Spectrum Master MS2720T, Руководство пользователя

Страница: 817 / 1035

2-4 CDMA RF Measurement Setup CDMA Signal Analyzer
2-4 PN: 10580-00235 Rev. D 3GPP2 MG
2-4 CDMA RF Measurement Setup
To make CDMA RF measurements, connect the instrument to the base station and follow
these setup instructions. Press the
Measurements
main menu key then the
RF Measurements
submenu key to open the measurement menu.
Channel Spectrum Setup
This measurement displays the spectrum of the specified channel and channel power,
occupied bandwidth, and peak-to-average power.
From the
Measurements
main menu, use the following procedure for Channel Spectrum:
1. Press the
RF Measurements
submenu key to open the RF Measurements menu.
2. Press
Channel Spectrum
to display the active measurement ( Figure 2-3 ).
Figure 2-3. RF Measurement, Channel Spectrum
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com