Anritsu Spectrum Master MS2720T, Руководство пользователя

Страница: 768 / 1035

LTE and TD-LTE Coverage Mapping 7-3 Coverage Mapping
3GPP MG PN: 10580-00234 Rev. T 7-7
Save the Coverage Mapping Information
1. Press the
Measurements
main menu key.
2. Press the
Over-the-Air
submenu key, then
Mapping
.
3. Coverage Mapping has three save options. Refer to “Save KML Points” , “Save Tab
Delimited Points” or “Save JPG” .
All files will be stored in the default save location. To change the default location:
1. Press
Shift
, then
File (7)
to access the File menu.
2. Press
Save
.
3. Press
Change Save Location
.
4. Select an existing folder or press the
Create Folder
submenu key to create a new folder
in the instrument’s internal memory or on a USB drive.
5. Press
Set Location
to make the selected folder the new default location for saving files.
Save KML Points
In the Coverage Mapping submenu, press
Save/Recall Points/Map
, then
Save KML Points
. In
the Save dialog, change the file name as appropriate, then press
Enter
. The following
information is saved for the points currently displayed on the screen:
• Location and time based on GPS information
• Cell, Group and Sector ID
• Center Frequency
• Measured signals: S-SS, RSRP, RSRQ and SINR
The
.kml
file can be recalled and viewed on the instrument. Refer to “Mapping Save/Recall
Menu” on page 7-13 for information on recalling a map.
The
.kml
file can also be opened and viewed using Google Earth and a network connection.
1. Connect your computer or mobile device to the instrument via the Web Remote Control
server. To do this, enter the instrument IP address in your Web browser address bar.
You can look up your instrument IP address by pressing
Shift
, then
System (8)
,
followed by
Status
. If your instrument has not been set up with an IP address, press
System Options
, then
Ethernet Config
to access the Ethernet Editor dialog.
Note
Installing Google Earth
If you don’t have Google Earth installed on your computer:
1. Go to www.google.com/earth .
2. Click Download Google Earth and follow the on-screen instructions.
3. After installation and Google Earth is opened, user instructions and several
types of help are available from the Help pull-down menu.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com