Anritsu Spectrum Master MS2720T, Руководство пользователя

Страница: 977 / 1035

2-5 CW Generator Overview Chapter 2 — E-Series Tracking Generator
2-8 PN: 10580-00339 Rev. C Tracking Generator MG
2-5 CW Generator Overview
Option 20 includes a CW Generator. The CW Signal Generator provides a continuous wave
(CW) signal from the
GENERATOR/RF OUT
port of the instrument.
The following example displays the generator CW signal on the instrument display.
1. Connect a THROUGH cable between the
GENERATOR/RF OUT
and
ANALYZER/RF In
connectors as shown in Figure 2-8
2. Set the
Mode
to
Spectrum Analyzer.
Refer to Chapter 1 for details.
3.
Preset
the instrument
(Shift+1 > Preset
).
4. Set the spectrum analyzer frequency range using the Frequency (
Freq)
menu and
submenus. Refer to the Spectrum Analyzer Measurement Guide (10580-00244) for
additional information.
5. Press the
Shift
key, then the
Measure
(
4
) key. Press the
Generator
key.
6. Press the
Output Power
button and set the output power (at the output connector before
any external attenuation).
Figure 2-8. Through Cable Setup Example
Power Charge
+/-
.
0
3
Sweep
2
Calibrate
1
Preset
6
Limit
5
Trace
4
Measure
9
Mode
8
System
7
File
Shift
Back
Enter
ESC
Spectrum Master
MS2713E
GENERATOR/
RF OUT ANALYZER/
RF IN
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com