Anritsu s332e, Руководство пользователя

Страница: 91 / 102

Anritsu Tool Box and Line Sweep Tools 9-6 Using Line Sweep Tools
Site Master User Guide PN: 10580-00252 Rev. J 9-5
Marker Presets
The fastest way to manage markers on multiple traces is to use the preset function. The
marker and limit line preset toolbar allows users to quickly set all markers and the limit line
to pre-defined values on similar traces (
Figure 9-6 ).
First set the markers and limit lines on a typical trace to the desired values. Then, press the
red “
e
” or edit button on the Preset toolbar. This puts the preset buttons into “learn” mode.
Now, press a preset button (1 to 7). This programs the preset button where to put the markers
and limit lines. Finally, press the red “
e
” button again to exit the learn mode.
The programmed button is now enabled. Line Sweep Tools can program up to 7 buttons with
preset markers and limit line.
To use the preset, just press it and the markers and limit line will display at the programmed
locations even when switching to a new trace. The two arrow keys make going to the next, or
previous, trace simple. Using presets, a dozen similar traces can be reliably validated in
seconds.
Renaming Grid
The renaming grid, much like the naming grid in the E series instruments, allows users to
quickly and consistently rename filenames, trace titles, and trace subtitles. The grid can be
set up with custom phrases to make the renaming process simpler.
Figure 9-6. Preset Toolbar
Figure 9-7. Renaming Grid and Renaming Toolbar