Anritsu S331E, Руководство пользователя

Страница: 37 / 126

Site Master User Guide PN: 10580-00252 Rev. K 3-1
Chapter 3 — Quick Start Guide
3-1 Introduction
This chapter provides a brief overview of basic setups for the following measurement modes:
• “Cable & Antenna Analyzer” on page 3-2
• “Spectrum Analyzer” on page 3-7
For detailed descriptions of measurement functions and settings, refer to the appropriate
Measurement Guide as listed in
Appendix A .
3-2 Measurement Mode Selection
Press the
Menu
key, then press the shortcut icon for the desired application, or measurement
mode. See Figure 3-1 . Alternatively, you can press
Shift
followed by the
Mode
(
9
) key, then
select the measurement mode from the Mode Selector list box.
Figure 3-1. Menu Key Screen
Note
The application shortcuts displayed in the top rows of the Menu screen will vary
depending on the firmware and options installed on the instrument.