Anritsu Precision AutoCal 36585 Series, Справочное руководство, Страница: 15 / 18

Maintenance Instructions 2-4 Measuring Pin Depth
36585K/36585V RM PN: 10410-00279 Rev. C 2-5
Required Equipment
Pin Depth Gauge
Use an Anritsu Pin Depth Gauge or equivalent as shown below to accurately measure pin depths. Table 2-1
lists the gauge and reference block part numbers according to connector type.
A typical pin depth gauge kit consists of the following items, depending on the type of connector you are
measuring.
• Pin Depth Gauge
• Reference Block - for zeroing the gauge
• Adapters for connecting to a male or female connector
The gauge coupling nut and adapters will vary depending on the connector type.
Checking the Gauge
Pin depth gauges should be checked for cleanliness before each use. Follow the connector cleaning procedure to
inspect and clean the pin depth gauge.
Note
Connector pin depth gauge kits are available as part of the Anritsu 365xX Series Calibration Kits.
Refer to
Anritsu Precision RF & Microwave Components catalog.
Index Description
1 Pin Depth Gauge with needle setting at zero.
2 Positive needle direction clockwise to right.
3 Negative needle direction counter-clockwise to left.
Figure 2-2. Pin Depth Gauge
Table 2-1. Pin Depth Gauge Parts by Connector Type
Connector Type Gauge Part Number Reference Block Part Number
K 01-222 01-210
V 01-322 01-210