
3.3 How to Log In / Log Out
3-5
3
Op
er
at
ion
Met
h
od
Enter "admin" in the "Username" column. Enter the adminpassword
which was set for this device in the "Password" column.
If the password was not set, do not fill the "Password" column.
Click the [Login] button for login.
* For details of how to set the password, refer to [PureFlow WSX
Unified Network Controller NF7600 series Command Reference TCP
Acceleration Edition].
Be sure to set the adminpassword for security reasons.
For login by the RADIUS authentication server, enter the RADIUS server
user name in the "UserName" column.
Enter the RADIUS server password in the "Password" column, and click
the [Login] button for login.
When Top Page is displayed as shown below, login has been completed.
Note :
When a channel, a scenario and a filter register the biggest number with
this device, it takes time for operation of login of WebGUI, setting and
display.
When logging in to this device in WebGUI, please set each registration
number of the channel, the scenario and the filter to less than 3000.
Содержание NF7600 Series
Страница 7: ...III 1 2 3...
Страница 8: ...IV Blank page...
Страница 12: ...Chapter 2 Operating Environment 2 2 Blank page...
Страница 60: ...Chapter 3 Operation Method 3 48 Check that the scenario has been changed as shown below...