Anritsu MS27101A-IBCM, Быстрый старт

Страница: 10 / 12

QSG-6 Connecting the Hardware
QSG-8 PN: 10580-00470 Rev. B Mapper QSG
Connecting the Wireless Travel Router
The wireless travel router connects to the MS27101A.
1. Refer to Figure QSG-9 .
2. Connect the LAN Ethernet and USB type A cables to the wireless travel router.
3. Connect the wireless travel router USB Type A cable to the USB Type A port on the MS27101A.
4. Connect the wireless travel router LAN Ethernet cable to the Ethernet port on the MS27101A.
Powering On the In-Building Coverage Mapper
1. Disconnect the SM7005 cable from the SM7004 front panel if connected.
2. Set the SM7004 voltage to 12 VDC to operate the MS27101A as described in “Setting the SM7004
Voltage” on page QSG-4 .
3. Connect the SM7005 cable to the SM7004 front panel DC In jack.
4. Power on the MS27101A. After a few seconds, the green LED on the wireless travel router will power on.
This confirms that the MS27101A and the wireless travel router are communicating properly. The
In-Building Coverage mapper is now powered on.
1. Wireless Travel Router
2. MS27101A
Figure QSG-9. Ethernet and USB Cable Connection
1
LAN Ethernet
USB Type A
2