A-3 Alphabetical Listing
A-2
PN: 10370-10374 Rev. F
MG369xC GPIB PM
A-3
Alphabetical Listing
Table A-1.
Alphabetical GPIB Command List (1 of 13)
Command Code
Function
Page
*IDN?
Requests device identification.
ACW
Activates the currently open frequency parameter as CW.
AD1
Selects F1-
F alternate frequency sweep.
AD5
Selects F5-
F alternate frequency sweep.
AD6
Selects F6-
F alternate frequency sweep.
ADD
Opens the GPIB address parameter.
ADP1
Opens the internal AM % depth parameter.
ADP2
Opens the internal AM dB depth parameter.
ADR
GPIB address terminator.
AF1
Selects F1-F2 alternate frequency sweep.
AF3
Selects F3-F4 alternate frequency sweep.
AFU
Selects full range alternate frequency sweep.
AL0
Sets the alternate frequency sweep RF output to L0.
AL1
Sets the alternate frequency sweep RF output to L1.
AL2
Sets the alternate frequency sweep RF output to L2.
AL3
Sets the alternate frequency sweep RF output to L3.
AL4
Sets the alternate frequency sweep RF output to L4.
AL5
Sets the alternate frequency sweep RF output to L5.
AL6
Sets the alternate frequency sweep RF output to L6.
AL7
Sets the alternate frequency sweep RF output to L7.
AL8
Sets the alternate frequency sweep RF output to L8.
AL9
Sets the alternate frequency sweep RF output to L9.
AM0
Turns off the internal or external AM function.
AM1
Turns on the external AM function in linear mode.
AM2
Turns on the external AM function in log mode.
AM7
Turns on the internal AM function in linear mode.
AM8
Turns on the internal AM function in log mode.
AMI
Turns on the AM measurement mode.
AMO
Turns off the internal AM function generator if it is on.
AMR
Opens the internal AM rate parameter.
AMS
Opens the external AM %/V sensitivity parameter.
AMW(x)
Selects the internal AM waveform.
ASD
Opens the external AM dB/V sensitivity parameter.
AT0
Deselects ALC step attenuator decoupling.
AT1
Selects ALC step attenuator decoupling.
ATT(xx)
Sets the step attenuator value to xx (times 10 dB).
AUT
Selects automatic sweep triggering.
BPN
Selects -3.3V for retrace and bandswitch blanking outputs.
Содержание MG369 C Series
