Using the Power Sensor
Making Measurements
MA24104A UG
PN: 10585-00016, Rev. A
3-11
7. To remove the Offset Table correction, click
Offset Table Off
. A check mark appears in front of
Offset Table Off and the word Offset does not appear in the display window (see Figure 3-18).
Session Restore
The Anritsu Power Meter application retains the set up information of a session, even if the inline high
power sensor becomes disconnected from the PC. When the inline high power sensor is reconnected, the
changed properties (if different from default) will be highlighted for five seconds as a reminder of the
changed set up. The set up information is lost once the application is closed or a different model sensor is
connected.
3-4
Making Measurements
This section presents common procedures for using the MA24104A power sensor with a PC. These procedures
refer to the MA24104A sensor and Anritsu Power meter PC application buttons and menus that were
previously described. Before attempting these procedures, you should be familiar with the Anritsu Power
Meter PC application. If an Anritsu Master™ series instrument is being used, refer to the user documentation
that came with the instrument for procedures on operating external power sensors.
Figure 3-18. Offset Table Menu (Offset Table Off Status)
Figure 3-19. Session Restore