Anritsu HD-1500 Series, Инструкция по эксплуатации, Страница: 36 / 46

29
“Communication” will flash while data is being transferred, as shown below.
Do not disconnect the USB cable until “END” is displayed.
Instrument display during data transfer
※
It may take more than 5 minutes for this communication process depending on
the amount of data involved.
※
Do not press any keys on the measuring instrument during communication, as
this will terminate transfer or cause a malfunction.
※
Since the data in the measuring instrument is retained even after you selected
to run Data Input, if a communication error, etc. occurs during communication,
reselect Data Input.
The transferred data is saved as a CSV format file in the HD-DATA folder. (The
HD-DATA folder is created automatically in the destination folder, if not already
present.)
The file are named "HD-****.csv". The **** part in the file name denotes a number
assigned for each directory from 0001 to 9999. Even if a file is deleted, all other file
numbers remain unchanged.
No more data can be saved in the HD-DATA folder if it contains a file with the
maximum number (9999). To save more data, either rename the folder or rename
the files.