Step2.
Go to NVR system, right click:
System setup
→
Channel Setup
→
Video
detection
.
Check Enable for Motion Detection
→
Open Alarm-mail Notice and App
Alarm
→
Click Ok.
Arming time---click this button, which you can set the alarm time.
Area edit--- click this button, which you can modify the motion detection area.
(Default motion detection area is the entire area a camera can see)
Step3.
Setup email account
Click right
→
System Setting
→
Network Setting
→
Email.
Enable E-mail function and fill
in email settings. Click Test until it is successful. If the test failed, please change to
another e-mail and try again. Finally, click OK to save all the settings (No matter test
success or not, please click Ok to save your settings first).
