2
4. Locate one of the table legs. Position the leg so
that the tab holes align with the table support holes
inside on both ends. Place a 1/4” flat washer on a
1/4”
-
20 x 1/2” thread cutting pan head Phillips screw.
Insert a screw with washer into each tab and tighten
using a #3 screwdriver.
5. Install the second leg in the same manner.
6. Adjust the leveling feet on the legs as needed.
¼”
-
20 x ½” Thread Cutting Pan
Head Phillips Screw
Legs
¼” Flat Washer
NOTE: Please contact Customer Care at 1-866-797-1761 for assistance in placing a replacement part order.
7/31/2019 Copyright 2019 ANOVA® Manufactured in the U.S.
¼-
20 x ½”
Thread
Cutting Pan Head
Phillips Screw
Legs
¼” Flat Washer
