2
Gl i de
Ta bl e Leg
Pa cki ng ca rdboard or
other s oft work surface
Ri vet Nut
5.
Insert one 1/4” flat washer
and one 1/4” Nylock nut
per each
PEM® stud.
Ta bl e Top
Nyl ock Nut
Fl a t
Wa s her
4.
While leaving the pre-assembled table top upside down on the
padded work area, slide each leg down the slots of each corner of
the table top as shown.
Ta bl e Leg
3.
Locate the hardware pack included with the product. Hand-screw
each glide into the rivet nut at the base of each leg.
PEM® Stud
6.
Use
a ratchet with a 7/16” socket to fully tighten each 1/4”
Nylock nut. The aprons are adjustable and should align with the
legs.
7/17/2019 Copyright 2019 ANOVA
®
Manufactured in the U.S.
7.
Carefully stand the table up right.
8.
After two weeks, retighten all the hardware.
NOTE: Pl ea se contact Customer Ca re a t 1-866-797-1761 to receive assistance in placing a replacement part order.
Apron
Apron