10/2012
4. Attach the other Bench Support to the Bench Seat in the
same manner, installing the Bolts from the outside inward.
Leave the hardware finger tight.
5. Turn the Bench upright. Tighten all hardware while
checking with a Level.
6. Move the assembled Bench to the desired location.
NOTE: The foot of each Bench Support features an 8” square
plate with four .5” diameter mounting holes. Mounting
hardware, appropriate to the surface the bench will be
mounted to, must be purchased by the user. Follow any
directions provided with the mounting hardeware.
7. Retighten hardware two weeks after initial assembly.
Washer
and Bolt
Washer and
Flanged Nut
Do not drag the assembled unit across any surface.
•
This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to
•
remove surface dirt. Do not clean with a solvent or petroleum based products.
Furniture must not be used other than for its intended purpose and should be inspected regularly for loose,
•
missing, or broken hardware, and general instability.
Furniture that is damaged or appears to be unstable must be removed from service and be repaired or replaced.
•
Repairs must be made using only factory authorized parts and methods.
•
wArnInG
cAre AnD
mAIntenAnce
211 No
rth Lindbergh Blvd.
St. Louis, MO 63141
tel: 888.535.5005
web:
anovafurnishings.com