10/2012
ASI 127
5. Determine the location for bench, locate underground utilities and avoid them while digging holes for the concrete bases.
Ground Level
19.75”
21.75” MIN
12.00” MIN
6. The walls of the concrete base should be vertical and
smooth to minimize the effects of frost upheaval. This
can be achieved with the use of concrete forms, such
as Sonotube. Consider extending the concrete base
below the frost line to eliminate the possibility of frost
upheaval. Consult a professional for loose or unusual
soil conditions.
7. Create a temporary structure to support the Bench,
at the desired height and level, while the concrete is
curing.
8. Fill the forms with concrete and insert the Bench
Supports, centered in the forms, until the Bench is
supported by the temporary structure. Allow the Bench
Supports to fill with concrete. Crown the concrete cap
to optimize drainage.
9. After the concrete has cured remove the temporary
structure and retighten all hardware.
Do not drag the assembled unit across any surface.
•
This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to
•
remove surface dirt. Do not clean with a solvent or petroleum based products.
Furniture must not be used other than for its intended purpose and should be inspected regularly for loose,
•
missing, or broken hardware, and general instability.
Furniture that is damaged or appears to be unstable must be removed from service and be repaired or replaced.
•
Repairs must be made using only factory authorized parts and methods.
•
wArnInG
cAre AnD
mAIntenAnce
211 No
rth Lindbergh Blvd.
St. Louis, MO 63141
tel: 888.535.5005
web:
anovafurnishings.com
