Assembly InstructIons
F3017
6 ft Flat Bench
F3021
6 ft Flat Bench
F3024
8 ft Flat Bench
F3030
6 ft Flat Bench
F3033
8 ft Flat Bench
F3035
4 ft Flat Bench
F3040
8 ft Flat Bench
D3021
6 ft Flat Bench
D3024
8 ft Flat Bench
tools neeDeD
1/2” Open-end or Box-end Wrench
•
Ratchet with 1/2” Socket
•
Level
•
8 x
5/16”
Flat Washer
4 x
5/16”
Flanged Hex Nut
4 x
5/16” X 1.25”
Hex Head Bolt
Assembly:
NOTE: Before assembling the Nuts to the Bolts, it is recommended that a light oil or petroleum jelly be applied to the
Bolt threads.
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
ASI 127H HRD5 S311
2. Place the Bench Seat upside down on the
packaging cardboard or other soft surface.
Position one of the Bench Supports near the end
of the Seat.
3. Align the mounting holes in the bracket on the
Bench Support with the mounting holes in the
Bench Seat frame. Install a Washer onto one of
the 1.25” long Bolts and insert the Bolt through
both parts, with the Bolt head toward the outside
surface of the Bench Seat. Install a Washer and
Flanged Nut on the inside end of the Bolt.
NOTE: Installing the Bolt in this direction reduces the
risk of scratching during use.
Leave the hardware finger tight so that
adjustments can be made.
Install a Bolt and Washer through the other set
of mounting holes in that end of the Bench Seat
frame and Bench Support bracket and install a
Washer and Flanged Nut. Tighten the hardware.
Assembly HArDwAre:
bencH components:
1 x
Bench Seat
Bench
Support
Bench Seat
Flat Washer
Flanged Nut
Flat Washer
1.25” Long Bolt
model F3017 shown
seat length and pattern
may vary
2 x
Bench Support
4. Attach the other Bench Support to the Bench
Seat in the same manner, installing the 1.25”
long Bolts from the outside inward. Tighten the
hardware after both Bolts are installed.
Washer and
1.25” long Bolt
Washer and
Flanged Nut
Packaging cardboard
or other soft surface
OR
anovafurnishings.com
888.535.5005 tel
