Do not drag the assembled unit across any surface.
•
This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to
•
remove surface dirt. Do not clean with a solvent or petroleum based products.
Furniture must not be used other than for its intended purpose and should be inspected regularly for loose,
•
missing, or broken hardware, and general instability.
Furniture that is damaged or appears to be unstable must be removed from service and be repaired or replaced.
•
Repairs must be made using only factory authorized parts and methods.
•
wArnInG
cAre And
mAIntenAnce
211 No
rth Lindbergh Blvd.
St. Louis, MO 63141
tel: 888.535.5005
web:
anovafurnishings.com
10/2012
1.5” long Bolt
and Flat Washer
Flat Washer
and Nut
Packaging cardboard
or other soft surface
4. Attach the other Rack End to the other end of the Inner Rack in the same manner, installing the 1.5” long Bolts from the top.
Tighten the hardware after both Bolts are installed.
5. Retighten all hardware two weeks after initial assembly.
