anovafurnishings.com
888.535.5005 tel
Assembly InstructIons
brP101
Loop Bike Rack
brP102
Hoop Bike Rack
tools needed
9/16” Open-end or Box-end Wrench
•
Ratchet with 9/16” Socket
•
16 x
3/8”
Flat Washer
8 x
3/8”
Hex Nut
8 x
3/8” X 1.5”
Hex Head Bolt
Assembly:
NOTE: Before assembling the Nuts to the Bolts, it is recommended that a light oil or petroleum jelly be applied to the Bolt threads.
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2. Place the Inner Rack on the packaging cardboard or other soft surface. Position one of the Rack Ends near one end of the Inner
Rack.
3. Align the mounting holes in the bracket on the Rack End underneath the mounting holes at the end of the Inner Rack. Install a
Flat Washer onto one of the 1.5” long Bolts and insert the Bolt through both parts, with the Bolt head on the top surface of the
Inner Rack. Install a Washer and Hex Nut on the end of the Bolt.
Leave the hardware finger tight so that adjustments can be made.
Install a Bolt and Washer through the other set of mounting holes in that end of the Inner Rack and Rack End bracket and
install a Washer and Nut. Tighten the hardware.
Assembly HArdwAre:
bencH comPonents:
2 x
Rack End
Nut
Flat Washer
Hex Head Bolt
Flat Washer
1.5” Long Bolt
and Flat Washer
Model BRP101 shown.
Inner Rack design may vary.
1 x
Inner Rack
(Hoops or Loops)
Packaging cardboard
or other soft surface
OR
Flat Washer
and Nut
Inner Rack
Rack End
