Anova BIO300, Инструкция и руководство пользователя

Страница: 10 / 14

10
Wood chipping
Note: The diameter of the woods and branches should not exceed 120mm.
Caveat
Do not put your hands into the intake duct when charging. This is a very unsafe method and
could result in injury to your hands.
Do not reach over or cross the rail while the wood chipper is running. This is a method that could
cause personal injury, even death.
When it's locked
If the roller stalls while cutting wood or branches, the motor should be stopped, the wood stuck
in the roller removed, then the motor restarted and re-chipping.
5. Maintenance
Regular maintenance is the way to ensure the best performance and long life of your machine.
Consult this manual for proper maintenance procedures.
Caveat
Before performing any maintenance or inspection procedures, stop the engine, unplug the power
cord and wait 5 minutes to allow all parts to cool. Disconnect the spark plug wire to prevent
accidental starting. Disconnect battery terminals (electric start only).
Maintenance procedure
Process
Before each
use
Every
3
hours
every 25
hours
every 100
hours
Check engine oil level
Δ
Check the general equipment
Δ
Check that the wedge is sharp
Δ
check belts
Δ
Check tire pressure
Δ
Clean exterior and engine cooling
First time
use/
Every 5 hours
of use
Δ
Change engine oil
Δ
Replace air filter
Δ
Replace the spark plug
Δ