17
EN
Electric Chain Saw Sharpener
This electrical powered chain saw sharpener is designed to sharpen most types of chainsaw
chain.
IMPORTANT SAFETY INFORMATION
Wear eye protection and dust mask. Grinding will cause dust and sparks; Chain Saw Cutters
must be sharpened equally and evenly. Uneven sharpening can cause the saw to kickback,
resulting in potential personal injury.
WARNING
Chain saw sharpener operates at high speeds. Incorrect assembly or misuse can result
in personal injury or property damage. Read and follow ALL safety precautions listed
below. Failure to follow all instructions may result in electric shock, fire, serious personal injury
and/or property damage.
• Grinding produces sparks during operation. Always use this tool in a well-ventilated area.
Do not use in areas containing explosive fumes or flammable materials.
• Grinding produces a fine, dust-like debris while in operation. Always wear a standard dust
mask during operation. This took should always be used in a well-ventilated area.
• Keep work area clean and well lit.
• Always wear adequate eye protection to withstand flying sparks and metal shavings/
debris.
• Always make sure that the power switch is in the OFF position before plugging into a
power source.
• Double check the locknut for correct, secure grinding-stone installation before each use.
• Do not use on any object other than saw chain.
• NEVER sharpen saw chain while the chainsaw’s engine is running.
• Keep bystanders, children and visitors away while operating power tools. Distractions can
cause you to loose control and lead to personal injury and or property damage.
• Never use this power tool in wet or rainy conditions. Water increases the risk of electric
shock.
• Never use the cord to carry the tool or pull plug from the outlet. This can result in cord
damage and potential risk of electric shock. When operating a power tool outside, use an
outdoor extension cord marked “W-A” or “W.” These cords are rated for outdoor use and
reduce the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools may result in serious personal injury.
• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be
caught in moving parts.
• Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with
your finger on the switch or plugging in tools that have the switch on invites accidents.
• Remove adjusting keys or switches before turning the tool on. A switch or a key that is
left attached to a rotating part of this tool may result in personal injury.
• Keep proper footing and balance at all times. Proper footing and balance enables better
control of the tool in unexpected situations.
• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes,
hard hat, or hearing protection must be used for appropriate conditions.
ASSEMBLY OF CHAIN SAW SHARPENING ATTACHMENT