11
7. Fixture menu
The ArcPower Rack Unit Pixel menu allows to set the fixture according to your needs, obtain information on its
operation and program it, if it has to be used in a Stand-alone mode.
The fixture´s menu can is controlled directly by touching desired icon.
After switching the fixture on, the display shows the initial screen for a few seconds
and after that the main menu screen will appear.
Icons used in the touch screen menu.
-
[back arrow] used to move to the previous screen
-
[forward arrow] used to move to the next screen.
-
[up arrow] used to scroll menu up.
-
[down arrow] used to scroll menu up.
-
[confirm] used to save adjusted values, to leave menu or to perform desired action.
-
[cancel] used to leave menu item without saving changes.
-
[back arrow] used to move to the main screen
7.1 Configuration
DMX Address
---Use the menu item to set DMX address of the ArcPower Rack Unit Pixel, which is defined as
the first channel from which the ArcPower Rack Unit Pixel will respond to the DMX controller.
DMX mode
--- The menu item allows to select desired DMX mode (Mode 1-fixed, Mode 2-8 bit, Mode 3 -full
16 bit, Mode 4-fixed order, Mode 5- without global effects). This menu item serves for LED zones only (not for
pixel zones).
DMX In
--- The menu item allows to choose type of fixture control:
Wired
- DMX signal is received by means of the standard DMX cable.
Ethernet
- The signal is received by means of the Ethernet cable, supported protocols
are ArtNet, MANet, MANet2, sACN.
Ethernet
--- The menu allows needed settings for Ethernet operation
Ethernet mode
- The option allows to select desired protocol: ArtNet, gMA1, gMA2, sACN.
Содержание ArcPower Rack Unit Pixel CE: ArcPower Rack Unit Pixel US
Страница 1: ...version 1 7...
