Anolis ArcControl SU, Руководство пользователя

Страница: 3 / 6

ArcControl SU
3
1. Features
•DMX stand alone controller
• Compatible with any DMX fixture or DMX LED driver
• Ready-to-use (pre-loaded with 8 scenes and 170 RGB fixtures)
• Sleek black glass design which sits 10mm from the wall
• Color palette (can also be used for scene selection)
• 12 touch-sensitive buttons. No mechanical parts
• Touch-sensitive wheel allows for accurate color selection
• Built-in flash memory for storing programs
• Up to 36 dynamic or static scenes
• 512 DMX channels. Control 170 RGB fixtures
• USB connectivity for programming and control
• 8 dry contact trigger ports
• Windows/Mac software to set dynamic colors/effects
• Programmable through the included USB cable and control software
2. Installation
1. Mount an electrical box inside the wall
The controller can be installed in a standard electrical
backbox. This box is usually 60mm high and wide,
except in Japan and America where it is 83.5mm/3.29
inches high. You can insert the AC/DC adapter inside or
outside the backbox.
2. Connect the wires
POWER : Connect a 5-10V 0.6A ACDC supply. Be sure to not invert the + and the ground.
DMX : Connect the DMX cable to the lighting receivers (LEDs, Dimmers, Fixtures..) (for XLR:
1=ground 2=dmx- 3=dmx+).
There are 2 ways to connect the power and DMX:
Connector block RJ 45
CHECK PIN CONFIGURATIONS. APPLYING POWER TO THE DMX INPUT WILL DAMAGE THE
CONTROLLER .