10
Chapter 2
Installation and
Connections
2.1
DVR Installation
During the installation of the DVR:
1.
Use brackets for rack mounting.
2.
Ensure there is ample room for audio and video cables.
3.
When installing cables, ensure that the bend radius of the cables are no less than five
times than its diameter.
4.
Connect both the alarm and RS-485 cable.
5.
Allow at least 2cm (
≈0.75
-inch) of space between racks mounted devices.
6.
Ensure the DVR is grounded.
7.
Environmental temperature should be within the range of -10º C to 55º C, 14º F to
131º F.
8.
Environmental humidity should be within the range of 10% to 90%.
2.2
Hard Disk Installation
Before you start:
Before installing a hard disk drive (HDD), please make sure the power is disconnected
from the DVR. A factory recommended HDD should be used for this installation.
One or two SATA hard disks can be installed depending on different models.
Tools Required:
Screwdriver.
Содержание Turbo
Страница 1: ...Quick Start Guide ANNKE POWER MENU ESC STATUS Tx Rx Digital Video Recorder ...
Страница 37: ...36 ...
Страница 38: ...37 ...