annke N44PI, Краткое руководство по эксплуатации, Страница: 30 / 46

29
2.9 Setting Email
The system can be configured to send an Email notification to all designated users if an
alarm event is detected, etc., an alarm or motion event is detected or the administrator
password is changed.
Before configuring the Email settings, the NVR must be connected to a local area
network (LAN) that maintains an SMTP mail server. The network must also be connected
to either an intranet or the Internet depending on the location of the e-mail accounts to
which you want to send notification.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network > General
2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS
Server in the Network Settings menu, as shown in below.
3. Click Apply to save the settings.
4. Select the Email tab to enter the Email Settings interface.