annke I51DB, Быстрый старт, Страница: 12 / 32

Network
Turret
Camera
·
Quick Start Guide
11
And you can take steps of ceiling moun ng as a reference for wall
moun ng.
Steps:
1. Paste the drill template (supplied) to the desired moun ng
posi on on the ceiling.
2. Drill the screw holes and the cable hole in the ceiling according to
the drill template.
Note:
Drill the cable hole, if adop ng ceiling outlet to route the cable.
85
m
m
(3.
35
"
)
110
mm
(4.3
3
"
)
3-
4.2
m
m
(0.1
7
" )
20 m
m
(0.79
"
)
Screw
Hole
Cable
Hole
Figure 2-1 The Drill Template
3. Disassemble the camera.
1).
Rotate the camera to align the notch to one of the marks.
2). Insert a coin or another similar tool to the notch.
3). Press down the coin or another similar tool to pry the
moun ng base so as to separate the moun ng base from the
camera.