11
2. Buttons on panel:
Button
Description
Power wake up
Press P to wake up sleep mode screwdriver.
UP
In setting mode, press up to select and change value.
DOWN
1. In setting mode, press down to select and change value.
2. Press and hold for 5 seconds to turn of counter function and turn off
display. Press and hold again for 2 seconds to resume counter function.
3. Press and hold for 3 seconds to clear counting.
Set / Select
1. Press and hold for 3 seconds to enter setting mode.
2. Press Set/Select in setting mode to go to next setting.
3. When NS triggered, press Set/Select to unlock.
Reset
Reset
Press R to reset (factory default setting).
UP
DOWN
Up+Down (switch to connect to wireless controller)
1.
Press up and down simultaneously for 10 seconds to connect
screwdriver to MY-WSIO. At this moment screwdriver settings must
be set from MY-WSIO.
2.
Press up and down simultaneously for 10 seconds to disconnect
screwdriver and MY-WSIO.
*Screwdriver default set as disconnected to MY-WSIO.
Power wake up
Set / Select
Power wake up + Set / Select
Press simultaneously for 5 second to enter learning mode.
+
+
+
+
