Before first use
Before first use, it is recommended to operate the
kettle for 2 or 3 times following the instructions
below, this will remove any dust or residue
remaining from the manufacturing process.
·
Remove the kettle from the base before filling.
·
To fill the kettle, open the cover by pulling the lid
handle upwards, then fill water to the desired level
(Min.0. 6L - Max.1.7L). Close the lid by pressing it
down until it clicks into place.
·
Plug the power supply cord into mains power.
Press the ON/OFF switch, and the power indicator
should light up.
·
When the water has boiled, the kettle will switch
OFF automatically. You can stop the boiling
process at any time by lifting the On/Off switch. The
power indicator will go out.
Cleaning
·
First read the instructions in the section titled
“IMPORTANT INSTRUCTIONS”.
·
Always disconnect the kettle from mains power
outlet before cleaning.
·
Before cleaning, make sure the kettle is cold
enough.
·
Empty the kettle and clean the exterior surface of
the kettle with a clean, damp cloth to preserve its
original highly polished finish. Dry and polish with a
soft cloth.
·
Do not use abrasive cleansers or scouring agents
of any kind inside or on the exterior of the kettle.
·
Only use the dry cloth to wipe the base of the
kettle.
