Page 12 of 16
To remove the inner filter, simply grasp it and lift away. (refer to “Cleaning”
section for how to clean)
Gently tap the edge of the filter on the inside of the bin to dislodge any dust and
debris.
To refit the filters, just reverse the order of disassembly.
Note
: if the white inner filter is damaged or worn out, replace with a new one.
Important
: Ensure the black seal of the inner filter is facing down.
Incorrect fitment of this part will prevent the vacuum cleaner from picking up the
dust, and you may damage the components.
Place the filter assembly back into the dust canister and then refit to the vacuum
cleaner.
Place the dust canister into the recess and push down until it locks in place.
