OPERATION
Filling the water tank
⚫
Ensure that the iron is cold and not connected to mains power.
⚫
Open the water filling inlet (4) by lifting the cap.
⚫
Hold the iron in a tilted position and fill the water tank with plain water by using the measuring cup.
⚫
CAUTION! DO NOT exceed the max level on the water tank.
⚫
Close the water filling inlet (4) by pressing down the cap until you hear a click. Ensure the water tank is properly
closed to avoid water spillage.
NOTES: To avoid calcium deposits, we recommend using distilled water to fill the water tank.
IMPORTANT! To avoid damage or blockage of the steam iron, do not use any scented water or
additives.
Steam Ironing
⚫
Fill the water tank with water.
⚫
Position the iron vertically on its charging base, stand on a suitable flat stable surface.
⚫
Ensure that the steam function is OFF: checked steam setting display (5) shows
“0”.
⚫
Connect the supply cord plug into a suitable mains power outlet socket, the BLUE Power indicator lamp on the
iron should illuminate.
⚫
Turn the temperature dial (9) to a setting within the steam range
⚫
When the indicator light is OFF, it means the iron is ready to use.
⚫
Press the steam setting button (8) to select desired steam level.
Check steam setting display (5):
“0” –
no steam
“1” –
low steam
“2” –
high steam
⚫
Now steam ironing can begin.
Dry Ironing
⚫
Position the iron vertically on its charging base, stand on a suitable flat stable surface.
⚫
Ensure that the steam function is OFF: check steam level indicator is showing
“0”.
⚫
Connect the supply cord plug into a suitable mains power outlet socket, the BLUE Power indicator lamp on the
iron should illuminate.
⚫
Turn the temperature dial (9) to a desired tempereature setting.
⚫
When the indicator light is OFF, you may start dry ironing.
Steam spray
⚫
Set the temperature dial (9) at MAX position, when the indicator goes off, press the spray button a couple of
times to moisten the garment. Before spraying make sure that there is enough water in the water tank.
NOTE: Do not spray water on silk.
Steam shot
⚫
Set the temperature dial (9) at MAX position, when the indicator goes off, press the steam shot button to
instantly provide a powerful burst of steam to eliminate stubborn wrinkles.
