
Page 7 of 12
3 Instructions for Use
3.1 Charging the Appliance
Read the Safety Instruction first.
IMPORTANT:
This Appliance contains a built-in lithium-ion battery which must
only be charged using the supplied USB cable.
Always switch off and unplug the USB cable when charging is completed or
when not in use.
DO NOT allow to charge for more than 12 hours.
Normal charge takes approximately 2.5 hours with a 5Vd.c. 1A Charger
If any abnormality occurs during charging, (such as a burning smell or excessive
heat or even a strange sound) immediately turn off the charger and disconnect
the USB cable, Return the product to Kmart for replacement. Any repairs to the
product outside the warranty should be carried out by qualified electrical person
only, or the product must be disposed of.
IMPORTANT: The Appliance must be fully charged before first use.
•
Take the USB Cable and fully unravel it before using it to charge the
Appliance.
•
Plug the small end of the USB cable directly into the back of the appliance.
Note
: This small plug can only be inserted in one direction. If you cannot
push the plug in, rotate it 180° and then try again.
•
Plug the large end of the USB cable into your 5Vd.c. 1A USB charger (not
supplied) and switch on.
•
A Red light on top of the Clipper will illuminate indicating the battery is
charging.
•
When fully charged, the Red light will turn Blue.
Содержание RMT-668
Страница 12: ...Page 12 of 12...