Page 16 of 20
DO NOT
press on the top of the shaving blade surfaces as you will damage
them.
The easiest and most sanitary way to clean the product is to wash the shaver
head part and the whisker container with fresh warm (not hot) water each time
after use.
To do this:
•
Turn off the Shaver
•
Pry open each blade section one by one and then rotate them fully open
to expose the inner whisker container.
•
Repeat for the other three-blade sections.
•
Remove the Centre Blade Section. To do this, grasp the centre blade
surround and rotate anti-clockwise to unclip, then lift up and away.
•
You can brush out the whiskers with the small supplied cleaning brush and
then rinse the shaver head parts, the Blade Sections and the whisker
container for a minute or so until the whiskers have been washed away.
IMPORTANT
:
DO NOT
use high-pressure water or compressed air to try
and clean as you will damage the appliance.
