Page 10 of 16
4 Operation
4.1 Shaver
NOTE
: Remove the plastic Blade cover before use.
•
With the appliance fully charged, holding firmly in your hand, press the On /
Off button to turn on. It will start in the default Low Speed.
•
Within 10 seconds, press the On / Off button again and the speed will
increase to Med speed.
•
Within another 10 seconds, press the On / Off button again and the speed
will increase to High speed.
NOTE:
If the On / Off button is not pressed within 10 seconds, the current
speed will remain, and the next press of the On / Off button will turn the
appliance off.
During use, you will notice the battery level percentage number on
the LED display decrease.
The number shown is the amount of battery power left in %.
e.g., If the number is “99”, this means you have only used 1% of
the battery power.
When the battery level reduces enough to require recharging, approximately
10% remaining, the small Plug Symbol will flash to let you know it needs
recharging.
•
To use the Shaver:
1. Remove the protective cover.
2. Press the on/off switch to turn on the shaver.
3. Select the desired speed by pressing the On / Off button repeatedly.
