6
2. Lay the toaster on its back.
3.
Slide the latch (9) to the “open” position to unlock and
slide out
the
Glass
panel (8) from the toaster bottom.
4. Wash
Glass panel (8) in warm soapy water, rinse and dry thoroughly.
5.
Replace
the
Glass panel (8) back into the toaster bottom and Slide the latch
(9)
to the “LOCK” position to lock.
Note: the toaster will not operate if the glass panel
(8)
is not fitted and
locked correctly.
Heating tubes
1. To prevent damage, do not touch or wipe the heating tubes.
2. Any loose crumbs found under the heating tube should be cleared by gently
shaking the toaster and allowing it to drop into the crumb tray.
Care and cleaning
1. Before cleaning, disconnect the appliance from mains power outlet and let
the appliance cool down completely.
2. Pull out crumb tray at the bottom of the toaster and empty it. If the toaster is
used frequently, accumulated bread crumbs should be removed at least once
a week. Make sure the crumb tray is completely closed before using the
toaster again.
3. Wipe the outside of the toaster with a slightly dampened cloth and polish with
a soft dry cloth.
4. Do not immerse the toaster in water or other liquids.
5. When not in use or during storage, the power cord may be wound under the
bottom of toaster.
WARNING! Fire Hazard. The crumb tray should be cleaned regularly. Do not
allow breadcrumbs to accumulate in the bottom of the toaster.
TECHNICAL DATA
Voltage : 220-240V~ 50-60Hz
Power : 850 – 1000W
