Make sure the appliance is turned off before lifting the jug from power base.
Lift the jug by its handle. Remove the jug from power base. Pour the tea into the cup. After
each use, empty the tea left in the tea maker.
Parameters for each function is showed in below list:
Preset
Temperature
(
℃
)
Quantity
(g)
Brew
time
(minutes)
Temperature of
Keep
Warm(
℃
)
Time of Keep
Warm(minutes)
Green tea
80
2-3
3
70
30
White tea
85
2-3
3
70
30
Oolong tea 90
2-3
3
70
30
Black tea
100
2-3
2
70
30
（
2
）
Boil water
1. Remove the jug from power base, open the lid from the jug and remove the tea filter from
the jug.
2. Fill the jug with fresh water to desired level.
The level should not be less than MIN 0.5L.
Do not exceed the MAX (1.5L) water level mark.
3. Place desired amount of tea in the filter. Place the tea filter into the jug.
4. Close the lip according to symbol indicated on the lip.
5. Place the jug on the power base
.
6. Insert the plug into the socket, which must be earthed. You will hear two beeps.
7. Press the Boil Button (7).
8. Press the Start/Cancel button (8) to start boiling water.
9. After a few minutes, when you hear five beeps, it means that water has been boiled.
（
3
）
Keep Warm Function
1. After making tea, if the jug is not removed or disconnected from the base, the tea will be
kept warm for 30 minutes until it is disconnected. The minimum temperature of tea during
keep warm function is approximately 70
℃
. The corresponding light will flash slowly
during keep warm function.
2. After the water was boiled, if the jug is not disconnected from power base, water will be
kept warm for 40 minutes until it is disconnected. The temperature of water will be
approximately 90
℃
.
The corresponding light will flash slowly during keep warm function.
--
CLEANING AND CARE --
DANGER
– risk of electric shock
* Remove the supply cord plug from the mains power outlet socket before cleaning the kettle.
* The power base, plug and mains cord must not come into contact with water or other liquids.
* The kettle jug and power base must not be immersed in water.
* The product and its parts must not be cleaned in the dishwasher.